Mengatur Konfigurasi Register dari Mode Konfigurasi
Isu config-register perintah untuk mengatur konfigurasi register:
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#config
Router(config)#config-register 0×2102
Router(config)#end
Router#show version
Cisco Internetwork Operating System Software
IOS ™ 2500 Software (C2500-JS-L), Version 12.1(5), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Wed 25-Oct-00 05:18 by cmong
Image text-base: 0x03071DB0, data-base: 0×00001000
ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWARE (fc1)
Router uptime is 11 minutes
System returned to ROM by reload
System image file is “flash:c2500-js-l_121-5.bin”
cisco 2500 (68030) processor (revision D) with 16384K/2048K bytes of memory.
Processor board ID 03867477, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 Token Ring/IEEE 802.5 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
Configuration register is 0×2142 (will be 0×2102 at next reload)
Konfigurasi pengaturan baru mendaftar menjadi aktif setelah ulang router.
Router#reload
System configuration has been modified. Save? [yes/no]: n
Proceed with reload? [confirm]
Mengatur Konfigurasi Register dari ROMMON
Atur konfigurasi register dengan perintah confreg jika router dalam mode ROMMON:
rommon 1 >confreg 0×2102
Anda harus me-reset atau power-siklus untuk konfigurasi baru mendaftar untuk berlaku.
